scroll to top
Stuck on your essay?
Get ideas from this essay and see how your work stacks up
Word Count: 631
How To Make Sandblasted Signs I am going to tell you how you can make a sandblasted sign The only necessary tools you need are bass wood or red wood rubber masking spray glue exacto knife sand paper paint which most of these items you can find at your local hardware store Also you need to know someone in your community who has a sandblasting machine to sandblast your sign You will also need a design for your board It can be your name or a symbol of what ever you want it to be NIKE STARTER etcNow that you know what you need you can proceed on your sign First thing you need to do is to get some bass or red wood Cut the boards to the exact size you want by using a band saw or hand saw Also use the following methods such as gluing planing and squaring the boards to the exact length you want your sign to be Once you have squared your board with the square your sign will be even on each side The next step will be to apply the rubber masking to your board Now you are ready to put your design on the rubber masking Apply the spray glue to the rubber masking Once you have sprayed the glue in a well ventilated area to the masking you should wait for about 2 minutes for the adhesive to dry and begin to cut out your design you have chosen This is a very time consuming task so it is best to take your time This is the time to start cutting on your masking It is best to leave about one half of an inch around the outside edge of the board Use your exacto knife to cut the masking Make sure to center your design and that it is suitably sized to your board It is important not
@Kibin is a lifesaver for my essay right now!!
- Sandra Slivka, student @ UC Berkeley
Wow, this is the best essay help I've ever received!
- Camvu Pham, student @ U of M
If I'd known about @Kibin in college, I would have gotten much more sleep
- Jen Soust, alumni @ UCLA